|
WiFi (The IEEE 802.11 standard)
Wi-Fi is a brand originally licensed by the Wi-Fi Alliance to describe the underlying technology of wireless local area networks (WLAN) based on the IEEE 802.11 specifications. Wi-Fi was developed to be used for mobile computing devices, such as laptops, in LANs, but is now increasingly used for more applications, including Internet and VoIP phone access, gaming, and basic connectivity of consumer electronics such as televisions and DVD players, or digital cameras. There are even more standards in development that will allow Wi-Fi to be used by cars in highways in support of an Intelligent Transportation System to increase safety, gather statistics, and enable mobile commerce IEEE 802.11p.
A person with a Wi-Fi device, such as a computer, telephone, or personal digital assistant (PDA) can connect to the Internet when in proximity of an access point. The region covered by one or several access points is called a hotspot. Hotspots can range from a single room to many square kilometres of overlapping hotspots. Wi-Fi can also be used to create a Wireless mesh network. Both architectures are used in Wireless community network. Wi-Fi also allows connectivity in peer-to-peer mode, which enables devices to connect directly with each other. This connectivity mode is useful in consumer electronics and gaming applications.
When the technology was first commercialized there were many problems because consumers could not be sure that products from different vendors would work together. The Wi-Fi Alliance began as a community to solve this issue so as to address the needs of the end user and allow the technology to mature. The Alliance created another brand "Wi-Fi CERTIFIED" to denote products are interoperable with other products displaying the "Wi-Fi CERTIFIED" brand.
Three well known IEEE standards are now being utilized in commercial Wi-Fi deployments. Some other new standards are now being ratified to provide improved performance to the existing networks.
802.11b cards can operate at 11 Mbit/s, but will scale back to 5.5, then 2, then 1 Mbit/s (also known as Adaptive Rate Selection), if signal quality becomes an issue. Since the lower data rates use less complex and more redundant methods of encoding the data, they are less susceptible to corruption due to interference and signal attenuation. Extensions have been made to the 802.11b protocol (for example, channel bonding and burst transmission techniques) in order to increase speed to 22, 33, and 44 Mbit/s, but the extensions are proprietary and have not been endorsed by the IEEE. Many companies call enhanced versions "802.11b+". These extensions have been largely obviated by the development of 802.11g, which has data rates up to 54 Mbit/s and is backwards-compatible with 802.11b.
The 802.11a amendment to the original standard was ratified in 1999. The 802.11a standard uses the same core protocol as the original standard, operates in 5 GHz band, and uses a 52-subcarrier orthogonal frequency-division multiplexing (OFDM) with a maximum raw data rate of 54 Mbit/s, which yields realistic net achievable throughput in the mid-20 Mbit/s. The data rate is reduced to 48, 36, 24, 18, 12, 9 then 6 Mbit/s if required. 802.11a has 12 non-overlapping channels, 8 dedicated to indoor and 4 to point to point. It is not interoperable with 802.11b, except if using equipment that implements both standards.
Since the 2.4 GHz band is heavily used, using the 5 GHz band gives 802.11a the advantage of less interference. However, this high carrier frequency also brings disadvantages. It restricts the use of 802.11a to almost line of sight, necessitating the use of more access points; it also means that 802.11a cannot penetrate as far as 802.11b since it is absorbed more readily, other things (such as power) being equal.
The 802.11g standard
In June 2003, a third modulation standard was ratified: 802.11g. This flavor works in the 2.4 GHz band (like 802.11b) but operates at a maximum raw data rate of 54 Mbit/s, or about 24.7 Mbit/s net throughput like 802.11a. 802.11g hardware will work with 802.11b hardware. Details of making b and g work well together occupied much of the lingering technical process. In older networks, however, the presence of an 802.11b participant significantly reduces the speed of an 802.11g network. The modulation scheme used in 802.11g is orthogonal frequency-division multiplexing (OFDM) for the data rates of 6, 9, 12, 18, 24, 36, 48, and 54 Mbit/s, and reverts to (like the 802.11b standard) CCK for 5.5 and 11 Mbit/s and DBPSK/DQPSK+DSSS for 1 and 2 Mbit/s. Even though 802.11g operates in the same frequency band as 802.11b, it can achieve higher data rates because of its similarities to 802.11a. The maximum range of 802.11g devices is slightly greater than that of 802.11b devices, but the range in which a client can achieve full (54 Mbit/s) data rate speed is much shorter than that of 802.11b.
|
